How Can You Boost Weak Mobile Signals?


In almost every country there are laws on public safety which ensure that the buildings are safe for use by the public.  Here are some of the laws:

  • The new buildings must have 95 percent to 100 percent in-building coverage to ensure proper communication during any emergency. If it is not there, they can’t be granted permissions.
  • Every new building must have complete coverage in the most critical areas e.g. command center, exit stairs, & elevator lobbies.

646febe6989fb66591abc883aecafd9c--car-accessories-mobile-phones

Is Your Building Ready To Tackle Emergencies?

There is no particular time when an emergency can strike. If the firefighter in your building tries to communicate with his teammates in the time of reliable emergency communication can be a matter of life and death. Such is the importance of strong signals in your building that you can’t afford to any loss of signal for any reason whether it is interference, attenuation, or reflection. When you use a cell phone booster for the office building, it ensures that you are getting proper signals in every part and that you are prepared to meet any emergencies.

So How Do Boosters Work?

A cell phone booster system do not read or modify the signal that passes through them. They reinforce the penetration of the signals (voice and data) in the areas where they are weak e.g. the dead spots, lower floors or the basement. As these devices amplify the signal penetration, they allow cell phone user to maintain complete connectivity with their carriers. Besides, these systems reduce any drainage of the cell phone battery as well.

Some Compelling Reasons To Install Cellphone Boosters

The cell phone boosters consist of a group of small antennas which work together to send amplified signals. It improves the coverage and the reliability of the cell phone signals where traditional cellular towers don’t work. Some reasons to have a cellular booster for an office building.

 Better Connectivity Increases Value

  • As compared to the buildings which aren’t getting proper signals, the building with appropriate signals will attract better customers, because weak signals may mean the loss of business.

Required By Law

  • A better connectivity is required by law as well. The regulatory bodies have made it mandatory for the buildings to have 100 percent connectivity in emergency areas.

Thus having a cell phone booster for office building can be helpful in many ways, so don’t wait to get one installed soon if you are facing the problem of weak signals.

4 Factors that Affect Signal Reception Quality of Your Mobile


There are plenty of factors that affect the signal reception quality of your mobile like, the distance between a cell phone and a cell tower, the connecting technology, power of transmitter in tower, size of cellphone network cell and so on. Therefore, blaming solely your cellular company for the bad network is not fair.

Let us get to know in detail about the factors that affect the single strength.

Distance

The maximum distance a cell phone can receive signals from a tower is approximately 45 miles. However, factors that determine the perfect signals depend on the phone technology that has been used. Cell phone tower transmits power of approx. 10 watts to 50 watts. Transmit power make a big impact on the range of a signal. If one lives outside an urban area, signal may have to make a long way to be picked by your cell phone (if there are not cell towers around).

Cell size

It may surprise you, but cell size highly affects signal strength within a cell network. Signal strength is directly proportional to cell size. The carriers diminish signal strength so that it doesn’t interfere with the other cells in the environs with same frequencies. It can cause major issues in several regions as one has to be present near a few hundred yards of a cell tower to receive signals. The signal strength can weaken with interference in the already diminishing signal area.

Lack of towers

Some cell phones require strong single strength for transmission which may cause many health related issues. Cell towers are usually installed in a honey comb structure to provide good coverage in a particular region. When you move out, the cell signals transfer to neighboring tower to make communication possible. It may be a problem in rural or low-density populated area where there is a lack of adequate towers.

Poor capacity planning

If a network career plans its customers to make more calls, cell size is reduced, and neighboring frequencies are re-used to assist a higher number of calls. The numbers of calls a tower can take remain limited to the number of frequencies provided by cellphone carrier. With few number of cell towers, it becomes difficult to avail a good signal strength.

Besides, some occasional intrusions affect signal strength like bad weather. If you are also facing regular call drops or weak network, you may use a single booster at your home to get rid of such problems.